How to Use a Safety Razor – Shaving Tips

Using a safety razor for the first time can be intimidating. They do look a little dangerous, but they are not. They are very safe to use — hence the name. That said, there is a special technique to use for the best result. Here are some of the best shaving tips for using a safety razor, so you can get a close shave free of irritation.  

Using a Safety Razor from A to Z 

If you have a good safety razor, you take your time, and you know what you are doing, using one is not very difficult. Let’s go over some of the most crucial shaving tips for using a safety razor, from the initial purchase, all the way to the final stroke. 

Invest in a Good Safety Razor 

One of the most important tips to follow when shaving with a safety razor comes before the shaving process. Investing in a good safety razor is key because if you purchase something cheap and lackluster, the result will be equally as bad. A crucial aspect of a safety razor is the handle. The best way to go is with a weighted handle, a feature that is not to be overlooked.  

Something like the Bladesman Silver Double Edge Safety Razor is a good option, as it has a weighted handle, it’s made of stainless steel, it’s easy to replace the blades, plus it has a good guard as well. Shaving with a safety razor is made much easier when you have a reliable product.  

The Blades 

Another important point to keep in mind is that safety razor blades are not very expensive at all, and many people will just throw them out after a single use; many would even recommend doing so due to hygiene issues. However, if were being honest, that is wasteful and there is absolutely no need for it.  

After you shave, simply remove the blade, wash it off, and dry it properly. This way, it won’t rust, and no bacteria will build upon it. The only reason we mention this is because shaving with a dirty blade can cause irritation and even infection. Proper blade hygiene is important.  

Lather Up 

When you shave with any razor, something you always have to do is to prepare your skin first. In this sense, shaving with a safety razor is no different than with a straight razor or a cartridge razor. Skin needs to be softened before shaving because it makes it much easier to remove facial hair, while also ensuring that you suffer from minimal skin irritation.  

It’s a good idea to use warm water, followed by a pre-shave oil, or just a high-quality shaving cream. Whatever the case is, don’t go right to it without preparing your face or using shaving cream. When applying the shaving gel, oil, or cream, make sure to rub it around well so it covers all hair and skin. 

Taught Skin 

Now youre going to start shaving, but before you do, a valuable tip is to always pull the skin as taught as you can. The tighter you pull your skin, the flatter and smoother the surface will be for the razor blade to pass over, and the more the hair will stand up, making it much easier to remove as much facial hair as possible, while also getting as close to the skin as possible. Angle your neck up and stretch your jaw forward when you go to shave any particular area.  

A 40-Degree Angle  

The great part about safety razors, if you get one with a weighted handle, is that you do not have to apply any pressure at all. The weight of the handle should be more than enough to force the blade through the hair with ease. For the best results, hold the blade at an angle of roughly 40 degrees from the skin when shaving.  

Never Shave Against the Grain 

Many people, when using a cartridge razor, will shave against the grain. Yes, this is a good option to consider if you want as close a shave as possible when using a cartridge or disposable razor. However, safety razors are more than sharp and precise enough to get a close shave no matter which direction you stroke in.  

The important thing to note is that when shaving against the grain with a safety razor, it may cause skin irritation and it won’t go as smoothly. Therefore, when using a safety razor, it is important that you shave with the grain — in the same direction as your hair grows.  

Do Not Use Long Strokes 

Another mistake that many beginners make when using a safety razor is to shave using long strokes, and even worse, crooked strokes. You want to shave in small bursts, a couple of inches at most, and always wash the blade after each stroke. This will ensure that the blade is free of hair and shaving cream, thus producing the best results.  

You also want to be sure to keep the strokes straight. Moving side to side with a safety razor can result in nicks and cuts, so this is to be avoided. Short and straight strokes are best for getting the closest shave possible with minimal, or hopefully no irritation.  

Finishing Up 

When you have finished shaving off the hair, rinse well with some cool water, just to remove any remaining shaving cream and loose hairs. Afterward, use a high-quality post-shave balm and apply it liberally. Not only will this give you a pleasant smell, but it helps tighten the pores, and it also helps prevent irritation.  

Conclusion 

As long as you invest in a good safety razor and some good shaving cream, and you follow the tips provided here today, you should get a smooth and close shave, free of irritation. Using a safety razor is not difficult, but you do need to use the right technique to prevent cuts and irritation, so take your time.